We provide end-to-end commercial air purifier services for organisations in Singapore that need measurable improvements in indoor air quality. Established in 1989, we bring over 30 years of expertise in Electrostatic Air Cleaner (ESP) systems and have been the sole distributor for Fresh-Aire UV USA UVC systems since 2013.
We match each space to the right solution — from ESP and UVC/UVGI to activated carbon and controlled ozone — rather than pushing a one-size product. Our approach covers planned design by room size, professional installation into ducts, AHUs and FCUs, plus ongoing maintenance so performance stays consistent.
The result is cleaner air, improved comfort and fewer odours, with practical risk reduction for germs. Learn about our full air treatment options and rental configurations at our air treatment page.
Cleaner indoor air for Singapore commercial spaces
Poor ventilation and neglected HVAC pathways turn enclosed workplaces into hotspots for odours and microscopic contaminants.
How poor indoor air affects workplaces, wellbeing and productivity
When ACMV systems run inefficiently, staff report discomfort and odour complaints. This links to absenteeism and lower output.
Daikin studies associate “Sick Building Syndrome” with maintenance emissions, which is why UV treatment is included in Green Building IAQ guidance.
Common contaminants we target
We design controls for dust, smoke and odours plus biological threats: germs, bacteria, fungi and viruses. These build on coils, ducts and return air paths.
Where our solutions fit in practice
Our work suits offices, hospitals, transport fleets, kitchen extract systems and industrial premises. High-load areas need specialised approaches.
- Operational reality: haze and service routines affect indoor comfort in Singapore.
- Decision criteria: contaminant type, area size, occupancy and installation limits guide system choice.
| Contaminant | Typical impact | Control approach | Where applied |
|---|---|---|---|
| Dust & smoke | Respiratory irritation, soiling | ESP, high-efficiency filters | Offices, industrial areas |
| Odours & VOCs | Complaints, reduced comfort | Activated carbon, ozone in ducts | Kitchens, exhausts |
| Germs, bacteria, viruses | Infection risk, absenteeism | UVC/UVGI, targeted disinfection | Hospitals, transport fleets, occupied rooms |
Our commercial air purifier services for offices, buildings and industrial premises
We start each project with a focused site survey that records building constraints, occupancy patterns and room size so selection is evidence-based.
Site assessment and air quality planning
We measure airflow, access points and usage to map priorities across rooms and floors.
- Survey constraints: duct runs, ceiling voids and power access.
- Match needs by room size, occupancy and contaminant type.
- Produce a plan with clear control targets and review points.
System selection across our product range
We select from our range to provide targeted control: EAC for particulates, UVC for biological control, activated carbon for odours and ozone for specialist odour work.
Installation, maintenance and compliance
Installations include AHU-mounted F2F units, SR ceiling flush EACs, FCU Blue-Tube fits and duct or parallel ADS UVC where needed.
“Professional installation plus scheduled maintenance keeps performance steady year after year.”
Our service covers access panels, power connection, mounting points and filter or cell checks, with documented handover for customer records.
| Product | Application | Notes |
|---|---|---|
| F2F Series EAC | AHU mounting | High particulate control, low pressure drop |
| SR Series | Ceiling flush | Up to 95% reduction of dust & germs |
| TUVC / ADS | Duct & airstream | Robust power options, lifetime parts warranty* |
Planned maintenance includes scheduled cleaning, lamp replacement planning and checks that each system continues to meet control objectives.
Technology options we deploy to improve air quality
Our toolkit spans proven methods — electrostatic collectors, targeted UV light and sorbent media — so we treat contaminants by type and location. We match equipment form and function to each application and operational limit.
Electrostatic air cleaning for grease, smoke and fine particulates
Electrostatic systems capture fine particulates with low pressure drop, making them ideal for kitchens and heavy-duty areas. We install S, EA and D series EACs; the S series can include a UV ozone lamp to reduce grease and odour build-up.
EA units give a cost-effective life span. D series doubles the cell configuration for higher capture in high-load zones.
UVC air purification and UVGI disinfection
We use germicidal light in AHUs, FCUs and ducts to neutralise bacteria, fungi and viruses by disrupting reproduction. Fresh-Aire UV ADS units work parallel to the airstream for high single-pass inactivation.
UVL 254nm modules fit FCUs and ducts. ESDS handles unoccupied surface disinfection while AIRE-FOIL offers upper-room protection in occupied spaces.
Activated carbon and zeolite filtration for odour and VOC control
Activated carbon cabinets (AWHE-VK) and AWHE-UV combine sorbent beds with UVC peaks for photolysis. AWHE-VZ uses zeolite nano-catalysts to target methyl mercaptan, ammonia and formaldehyde.
These filter options suit persistent smells and specific chemical vapours where simple filtration fails.
UV ozone and ozone discharge systems for tough odours
For stubborn cooking odours we use UV ozone and controlled ozone discharge inside ducts and hood areas. When applied correctly, ozone oxidises odour molecules without harming HVAC components.
Portable and ceiling-flush units for localised cleaning
Portable units give rapid deployment for a defined area, while ceiling-flush systems create discreet, continuous air cleaning in enclosed rooms. Choice depends on coverage, maintenance access and available power.
Commercial applications, configurations and rental service options
We map configurations to fit real building constraints, odour loads and occupancy patterns.
Kitchen odour control comes in three form factors: the B Series O3 duct insert for quick installation, hood model UVC & ozone units in multiple sizes, and the cabinet model with extra UVC tubes for heavy odour loads.
Building ACMV integration
For whole-floor control we mount F2F Series EACs to existing AHUs. This improves particulate capture and reduces germs without rebuilding the plant room.
FCU and duct retrofits
Blue-Tube UV and UVL Series 254nm modules fit FCUs and ducts for targeted microbial control. Installation is fast and unobtrusive.
Occupied vs unoccupied spaces
AIRE-FOIL provides upper-air disinfection for occupied rooms. ESDS handles surface disinfection when areas are unoccupied.
Monthly rental ozone steriliser options
Rental rates depend on the machine and setup. Coverage ranges 10–80 sqm per machine. We size units (AO50, AO96, AO10g, AO15G, AC138) and include installation and quarterly maintenance.
Service agreement expectations
Minimum six-month term, servicing every three months and one month’s notice to terminate keep procurement planning simple.
| Configuration | Typical application | Key models | Coverage / notes |
|---|---|---|---|
| Duct insert | Kitchen exhaust | B Series O3 | Quick installation, ideal where duct access exists |
| Hood / cabinet | High odour kitchens | B Series hood / cabinet | Cabinet adds more UVC tubes for heavy loads |
| AHU / FCU retrofits | Building & office | F2F, Blue-Tube, UVL | Whole-floor control; minimal plant room changes |
| Rental steriliser | Small to large rooms | AO50, AO96, AO10g, AO15G, AC138 | Rates on request; 10–300 sqm depending on model; installation & maintenance included |
Conclusion
We deliver measurable improvements in indoor air quality for offices, buildings and hospital premises. Better quality air supports staff wellbeing, reduces odour disruption and limits airborne contamination that affects productivity.
Our solution set combines electrostatic cleaning, UVC/UVGI, activated carbon filters and controlled ozone options. We match products and systems to room use, risk profile and installation limits so performance is predictable.
We do more than supply equipment. We provide assessment, selection, professional installation and ongoing service to keep control measures effective over time.
Contact us in Singapore for a site assessment and a clear recommendation on system size and layout. With local expertise since 1989 and proven deployments, we support prompt customer responses and maintainable outcomes.
